LIST NO. 32
Galvanised Water Tank |
 |
| | CONSTRUCTION | Folded over top rim, internally stayed as required | | DESIGN CODE | BS417 where applicable | | CAPACITY RANGE | 450 - 22700 litres | | STEEL GRADE | BSEN 10 025 S275 | | STEEL GAUGE | As shown on table below | | TESTING | Water fill | | FITTINGS | As listed overleaf, socket threads tapped out after galvanising. | | FINISH | Internally and externally acid dipped to remove mill scale and rust particles, rinse and hot dip galvanised BS729 | | | CONSTRUCTION | As for open top tanks except that tanks are closed by a fully bolted top section. Top curb is flanged outwards. Closed top galvanised tanks are designed and constructed for atmospheric pressure duty but steel thickness and/or internal staying arrangement can be modified to accommodate higher pressures. | | QUALITY ASSURANCE | Open and bolted top tanks, Level 'A', see List No. 140 for details |
In addition to the range of tank accessories listed overleaf, additional fittings can be supplied including HEATING COILS, IMMERSION HEATERS, CONTENTS GAUGES, FROST THERMOSTATS, INSULATION, ACCESS LADDERS AND HANDRAILING. |
To comply with new Byelaws all domestic water storage tanks must be fitted with the following: a warning pipe filter, a breather filter, a vent connector, a sealing type lid, a 90 degrees downturn to go below the normal shut off water level and an insulation jacket. Prices quoted on request. |
Prices tabled are ex works. Delivery cost will be quoted on request.
NOM'L
CAP'Y | NOMINAL DIMENSIONS | PLATE
THK'S | TANK WEIGHTS | PRICES - SEE NOTES BELOW | LENGTH | WIDTH | HEIGHT | OPEN
TOP | BOLTED
TOP | OPEN TOP | EXTRA FOR
COVER | BOLTED
TOP | INTERNAL PAINTING | 'BITUROS' | 'EPOXY' | LITRES | MM | MM | MM | MM | KG | KG | £'A' | £'B' | £'C' | £'D' | £'E' | 450 | 965 | 686 | 686 | 2.0 | 50 | 57 | 234 | 38 | 747 | 67 | 131 | 570 | 965 | 762 | 787 | 2.6 | 76 | 85 | 428 | 50 | 891 | 77 | 144 | 680 | 1092 | 864 | 736 | 2.6 | 84 | 95 | 475 | 65 | 965 | 88 | 153 | 910 | 1168 | 889 | 889 | 2.6 | 132 | 147 | 551 | 76 | 1161 | 99 | 166 | 1130 | 1524 | 914 | 813 | 2.6 | 118 | 135 | 625 | 95 | 1246 | 110 | 187 | 1600 | 1524 | 1143 | 914 | 3.0 | 183 | 204 | 729 | 126 | 1539 | 126 | 1225 | 2270 | 1829 | 1219 | 1016 | 3.0 | 226 | 253 | 828 | 153 | 1746 | 144 | 15279 | 2720 | 1829 | 1219 | 1219 | 3.0 | 255 | 282 | 981 | 171 | 1872 | 189 | 297 | 4540 | 2438 | 1524 | 1219 | 4.8 | 527 | 574 | 2034 | 225 | 2772 | 225 | 477 | 5680 | 2438 | 1524 | 1524 | 4.8 | 658 | 710 | 2448 | 243 | 3483 | 270 | 468 | 6880 | 3048 | 1524 | 1524 | 4.8 | 726 | 790 | 2925 | 252 | 3987 | 297 | 549 | 9090 | 2743 | 1828 | 1828 | 4.8 | 850 | 918 | 3474 | 279 | 4230 | 333 | 774 | 11360 | 2590 | 2438 | 1828 | 6.0 | 1160 | 1490 | 7470 | 621 | 9900 | 522 | 1026 | 13630 | 3048 | 2438 | 1828 | 6.0 | 1295 | 1645 | 8145 | 738 | 10386 | 594 | 1242 | 18180 | 3048 | 2438 | 2438 | 630 | 1750 | 2100 | 10602 | 738 | 13761 | 702 | 1449 | 22720 | 3048 | 3048 | 2438 | 630 | 1837 | 2300 | 12213 | 846 | 15048 | 792 | 1764 |
£(A) Open top galvanised tank, internally stayed, without support beams.(Fig.'1')
£(B) Extra cost for one, two or three section loose fitting (non air tight) lid.
£(C) Bolted top galvanised tank, rubber/neoprene gasket, without support beams.(Fig '2')
£(D) Extra cost for internal painting 2 coats mordant solution, 1 coat Bituros paint.
£(E) Extra cost for internal painting WRC approved 2 pack cold cure epoxy paint.
When fabricated steel tanks are hot dip galvanised, considerable stresses result. DISTORTION OF TANK PLATES AND ESPECIALLY WELDED IN FITTINGS IS UNAVOIDABLE. This feature must be taken into account when ordering tanks. INTEG will gladly advise you on the best method to minimise distortion.
SIZE | HALF
SOCKET | FULL SOCKET | FLANGE
ASA 150 | STUDDED
PAD | PLAIN
HOLE | MM | £ | £ | £ | £ | £ | 25 | 20 | 29 | 124 | 189 | 18 | 40 | 20 | 29 | 128 | 189 | 18 | 50 | 23 | 34 | 139 | 130 | 120 | 60 | 23 | 34 | 155 | 139 | 20 | 65 | 23 | 34 | 169 | 148 | 20 | 80 | 31 | 40 | 185 | 158 | 23 | 100 | 31 | 40 | 194 | 148 | 23 |
TANK FITTINGS | SIZE | PRICE
£ EACH | Access Hole with hinged cover | 300 SQ | 99 | 450 SQ | 128 | Manway with bolted cover
and rubber gasket | 460 SQ | 178 | 460 DIA | 158 | 600 DIA | 198 | Ball Float Valve
BS1212 HP
Brass c/w Copper Float | 150 | 20 NB | 90 | 200 | 25 NB | 189 | 250 | 40 NB | 450 | 300 | 50 NB | 576 |
<< Back to previous page |
|
|
|
