Bolted Steel Tanks, Site Welded Tanks, Diesel Oil Tanks, Carbon Steel Tanks and Tank Repair

LIST NO. 12

Below ground-single skin

PRICES CURRENTLY SHOWN AS 2006 - PLEASE APPLY A FACTOR OF x 1.3 AS A GUIDE TO CURRENT JUNE 2010 PRICES

UNDERGROUND TANKS - 'TWIN SKIN' CONSTRUCTION

A complementing range of underground tanks (2 - 54 cubic metres) is available where extra integrity and spill protection with inbuilt leak detection is essential. Refer to Integ List No. 13 for details.


Fill Point Cabinet Manufactured from 3mm thick mild steel complete with internal brackets for pipework, gauges etc., which are fitted on site by the installer. Cabinets are designed and manufactured to Post Office drawing DPOS4/3002, Revision 'A' as illustrated. Cabinets are grit blasted, metal sprayed and painted to specification. PRICE £819 ex works

CAPACITY		DIMENSIONS			STANDARD TANKS		BS2594 TANKS		HYDRO TEST
NOMINAL		DIAM	SHELL	O'ALL	WEIGHT	PRlCE	WEIGHT	PRICES
GALLS	M3	MM	MM	MM	KG	£'A'	KG	£'B'	£
500	2.3	1372	1525	1740	500	1716	500	1716	39
600	2.8	1372	1830	2070	600	1768	600	1768	39
1000	4.5	1372	3050	3290	800	2113	800	2113	39
1250	5.7	1525	3050	3330	900	2314	900	2314	52
1500	6.9	1525	3660	3940	1100	2444	1100	2444	52
2000	9.1	1830	3355	3695	1300	2659	1300	2659	59
3000	13.6	2135	3660	4060	1600	3120	1600	3120	78
4000	19.0	2287	4300	4680	2000	3783	2000	3783	117
5000	23.2	2287	5520	5900	2300	4063	2300	4063	137
6000	27.7	2440	5750	6255	2700	4719	3400	5883	163
7000	31.8	2745	5205	5745	2800	4739	3900	5915	189
8000	36.5	2745	6000	6540	3200	5252	4400	6552	215
9000	40.5	2745	6730	7270	3600	5493	4900	6864	254
10000	45.4	2745	7500	8040	3800	6000	5400	7501	306
12000	55.1	2745	9150	9690	4400	6702	6300	8236	397
15000	69.5	3000	9525	10505	5500	7417	7700	9757	468
20000	90.6	3000	12515	13495	6600	9341	10500	13293	494

NOTES TO TABLE ABOVE
(1) Actual capacities are calculated from nominal tank dimensions,
without allowance for ullage.

(2) Dimensions shown are approximate and are subject to
manufacturing tolerances.

(3) When site dimensions are critical this should be clearly
stated at order stage.

(4) Price 'A'. Tanks fabricated generally to BS799 Pt.5:1987, Type 'A'.
Price 'B'. Tanks fabricated generally to BS2594:1975/BSEN12285-1

PLATE THICKNESS

TANK TYPE	CAPACITY RANGE	THICKNESS (MM)
TANK TYPE	CAPACITY RANGE	SHELL	ENDS
STANDARDS	ALL TANKS	6	6
BS2594	UP TO 25M³	6	6
	25-70M³	6	8
	OVER 70M³	6	8

EXTRA TANK CONNECTIONS
Standard tanks are fitted with manway, fill/dip, suction and vent connections as specified. Where additional connections are required, these can be fitted at prices listed.

CONNECTIONS	Prices are £ each, fully welded
CONNECTIONS Nominal Bore	20	25	40	50	80	100	150	200	250	300
Screwed Socket	22	22	30	30	39	52	-	-	-	-
Flange BS4504	-	52	52	65	85	117	195	234	286	390
Flange ASA 150	-	52	59	72	104	137	221	260	332	449

EXTRA FITTINGS AND ACCESSORIES

Fitting	Description		Tank Nominal Diameter - Prices each
			1372 1525	1830 2135	2287	2440	2745	3000
			£	£	£	£	£	£
Dipstick	Brass 'T' Section Glass fibre		59	72	91	91	104	111
Dipstick	Brass 'T' Section Glass fibre		59	72	91	91	104	111
Fill/Dip Pipe	Fill and dip pipe including 300 riser screwed one end	50mm	91	111	111	117	117	137
		65mm	117	137	137	143	143	150
		80mm	137	150	150	163	176	176
		100mm	163	163	163	169	176	195
Suction Pipe	Suction pipe,screwed both ends	40mm	52	52	59	65	65	65
		50mm	59	59	65	72	72	78
		65mm	78	78	85	117	117	137

Fitting	Description	Size	Price each
Manhole		MM	£
	In place of Std 460 manhole Extra Manhole- standard Extra Manhole BS2594	600	137
		460	228
		600	260
Angle Check Valve	Non-return check valve	40	130
Angle Check Valve	Non-return check valve	50	150
Foot Valve/Strainer	Non-return check valve, vertical inlet	40	176
Foot Valve/Strainer	Non-return check valve, vertical inlet	50	195
Suction Flange	Additional suction flange, welded to manhole cover	40	52
Suction Flange	Additional suction flange, welded to manhole cover	50	59
Cap and Chain	Brass cap and chain	50	39
		65	52
		80	65
		100	91

NON-STANDARD TANKS - EXTRA LENGTH & COMPARTMENTS

Tank Diameter	Extra Capacity per 1M Length	Cost per extra 1M of Tank Barrel	Extra compartment plate		Location Strap with Bolt	Webbing H.D Strap
MM	Litres	£/M	6mm £*	8mm £*	£ each	£ each
1372	1478	351	1014	-	65	130
1525	1826	397	1105	-	65	130
1830	2630	475	1138	-	72	130
2135	3580	546	1196	-	85	143
2287	4108	592	1235	-	85	143
2440	4676	631	1287	-	91	163
2745	5919	709	1443	1625	111	163
3000	7070	774	1606	1801	130	176

UNDERGROUND TANK - TYPICAL INSTALLATION SEQUENCE